EA-PSM Academy

30/11/2021

02/12/2021

07/12/2021

09/12/2021

each session is 4 hours long

290€

Intermediate

English

Online

Share this course

Share on facebook
Share on twitter
Share on linkedin
Share on email
EA-PSM Academy is hands-on workshop during which you will be able to learn how to do power system studies faster and in better quality. You will know how to do Harmonic mitigation, Load flow, Motor starting, Protection coordination, Cable sizing and other studies.

Time until registration will be closed:

00
Days
00
Hours
00
Minutes
00
Seconds
Unfortunately, registration has already expired on 2021-11-24 23:59:59, visit our course page to find out about upcoming courses.

About this course

Who should attend this seminar?

  • System Studies Consultants
  • Electrical Power Systems Analysis Engineers
  • Power System Modelling and Simulation Consultants

 

What will you learn?

  • How to do power system studies.
  • How to do more projects with greater quality and avoid common mistakes.
  • How to create typical reports with EA-PSM Electric.

 

1st day (2021-11-30), 4 hours

Create your network single-line diagram with EA-PSM Electric

  • Install EA-PSM Electric on your computer.
  • Create a single-line diagram.

 

Power flows in electrical power systems with co-generation and renewable energy power plants

  • Power quality standard requirements for grid voltage characteristics.
  • Power grid state analysis after the connection of new load or power source.
  • A system with an operating reserve state analysis after the unexpected disconnection of a feeder.
  • Analysis of transformer operation under maximum loading conditions.
  • Tap changing transformers.
  • Overhead lines and cable sizing, to meet techno-economic requirements.
  • Voltage drop calculation.
  • Equipment sizing and assessment of their loading conditions.

 

2nd day (2021-12-02), 4 hours

Operation states of electric motors and higher harmonics analysis in electrical systems

  • Influence of motor start-up currents on the electrical network stability.
  • Reactive power compensation with electric motors and sizing of reactive power compensation devices.
  • Electric motors operation with variable frequency drives (VFD).
  • Assessment of voltage distortion level conducted by higher harmonics in the electrical network.
  • Selection of VFD with lower and higher harmonics.
  • Higher harmonics filtering.
  • Resonant conditions for higher harmonics in networks with reactive power compensation capacitors.

 

3rd day (2021-12-07), 4 hours

Short circuits and equipment sizing

  • Power grid parameters that are important for short circuit calculation.
  • Short circuit current from the power grid.
  • Short circuit current from the synchronous generator.
  • Short circuit current from an induction motor.
  • Short circuit current from renewable energy power plants.
  • Asymmetrical short circuits.
  • Phase-to-phase short circuits in 0.4kV power systems.
  • Phase-to-neutral short circuits in systems with isolated neutral.

 

4th day (2021-12-09), 4 hours

0.4 kV – 35 kV networks protection coordination

  • Low voltage fuses selection.
  • Low voltage breakers selection and coordination.
  • Coordination of fuses and breakers tripping curves.
  • Characteristics of maximum short circuit current protection devices in medium voltage networks.
  • Protection equipment against maximum short circuit currents settings calculation and sensitivity assessment.
  • Protection equipment against phase-to-neutral short circuits settings calculation and coordination.

 

Additional information:

  • During online training, participants will solve real cases with the software EA-PSM Electric.
  • Every participant will get Consultancy on their projects and EA-PSM Electric license for 60 days.
  • Small workgroups (up to eight individuals)

We will send the demo to your email address

Registration to EA-PSM Academy